Kannrybio beta-tricalcium phosphate powder package
β-Tricalcium phosphate powder
β-TCP

β-Tricalcium Phosphate (β-TCP)

Beta tricalcium phosphate powder for resorbable granules, graft composites and cement blends. Discuss the grade needed for your development process.

β-TCP, Ca₃(PO₄)₂, for orthopedic and dental material development. Compare phase identity, particle-size distribution and BET for your forming, blending or sintering route.

Technical profile

Product information

Values shown on the page are for preliminary review. The applicable grade specification and batch-specific documentation govern the supplied material.

Phase / composition
β-TCP, Ca₃(PO₄)₂
Confirm β-TCP phase identity; distinguish XRD phase purity from chemical purity.
Form
White crystalline powder
Final grade and morphology remain product-specific.
CAS
7758-87-4
Refer to the current product COA and SDS.
Typical display information
Purity≥98%
PSD<15 μm
phase purity99.2–99.6%
BET1–2 m²/g — typical catalog values
Typical catalog values only. Confirm which purity, PSD and BET limits apply to the selected grade and lot.
Packaging
Aluminium–plastic packaging
small packs10–50 g
large packs1 kg per pack
Specify the required pack size and number of packs in your enquiry.
Evaluation context

Typical development routes

  • Resorbable granule and block development
  • Composite filler studies
  • Calcium phosphate cement blends
  • Dental and orthopedic graft-system development
Selection note

Material Selection Criteria

Compare XRD phase identity, particle-size distribution, morphology and purity against the forming, blending or sintering route used by the customer.

Questions

Evaluation & ordering

Practical information for material evaluation, samples and purchasing.

State the required β-TCP phase, chemical purity and XRD phase-purity criteria separately, with the relevant test methods. Match these requirements to the selected grade specification and batch COA.

State any D10, D50 or D90 targets, the measurement method, and morphology or BET needs for your process. Agree the grade and PSD definition. The RFQ checklist, COA review guide and pilot-trial guide explain how to organize the review.

Describe whether the powder will be formed into granules or blocks, blended into a composite or used in a cement system. Include forming or sintering conditions and your phase, particle-size and batch-document requirements.

Send the intended forming, blending or sintering route, sample quantity and target phase purity, PSD, BET or morphology. Include test methods. We will review feasibility and confirm sample and packaging options.

Specify the material grade, quantity, pack size, delivery destination and documents needed. Request the applicable specification, SDS and lot COA; price, availability and lead time are confirmed in our response.

Technical & Commercial Enquiries

Request beta-TCP powder with your phase, particle-size, quantity and documentation requirements.

Request Information